HID® Proximity ProxPro® with Keypad 5355
Category HID Proximity
Brand HID
The ProxPro® proximity card reader's weatherproof design and architecturally attractive enclosure allows easy mounting indoors or out. The ProxPro Reader is ideal for applications requiring a larger read range
  • Ideal for medium-range applications
  • Available with Wiegand, Serial (RS-232/RS-422) or Clock-and-Data interface
  • Sealed for indoor or outdoor use
  • Optional glass mount kit available for mounting the reader behind glass
  • Available in gray or beige
  • Keypad data and card data can be sent on the same cable, or on a separate cable using 2 of 7 or 3 x 4 matrix
Key Features
  • Affords high reliability, consistent read range characteristics, and low power consumption in a single, easy-to-install package
  • Features multicolor LED, internal or host control of the LED, and/or beeper and a beeper "off" switch for silent operation
  • Provides Wiegand protocol interface compatibility with all standard access control systems
  • Offers an optional, fully integrated personal identification number keypad for heightened security. Can be mounted to glass (using the optional glass mounting kit)
  • Typical maximum* read range
    ProxCard® II Card - up to 8" (20 cm)
    ISOProx® II Card - up to 7" (17.5 cm)
    DuoProx® II Card - up to 7" (17.5 cm)
    Smart ISOProx® II Card - up to 7" (17.5 cm)
    Smart DuoProx® II Card - up to 7" (17.5 cm)
    HID Proximity & MIFARE® card - up to 7" (17.5 cm)
    ProxCard® Plus Card - up to 3" (7.5 cm)
    ProxKey® II Keyfob - up to 3" (7.5 cm)
    MicroProx® Tag - up to 4" (10.2 cm)
    ProxPass® Active Vehicle Tag - N/A

    *Depending on local installation conditions.

    5.0" x 5.0" x 1.0" (12.7 x 12.7 x 2.54 cm)

    Power Supply
    10-28.5 VDC; Linear power supplies recommended. Reverse voltage protection included

    Current Requirements
    Average: 100 mA (12 VDC)
    Peak: 120 mA (24 VDC)

    Operating Temperature
    -22º to 150º F (-30º to 65º C)

    Operating Humidity
    0-95% relative humidity non-condensing

    12 oz. (336 gm)

    Cable Distance
    Wiegand or Clock and Data interface: 500 feet (152 m)
    RS-232 interface: 50 feet (15 m)
    RS-422 interface: 4000 feet (1219 m)
    Recommended cable is ALPHA 1295 (22 AWG) 5 conductor stranded with overall shield or equivalent.
    Additional conductors may be required for LED or beeper control. RS-422 requires ALPHA 6212C 2-Twisted Pair, shielded cable with drain wire, or equivalent for data, plus ALPHA 1292C two-conductor shielded or equivalent for DC power
    Canada/UL 294 Listed: Access Control System Units
    FCC Certification, United States
    Canada Certification
    CE Mark, Fifteen EU Countries under the R&TTE
    Directive (EN60950 - ITE Electrical Safety, EN 300 330 - SRD, and ETS 300 683 - EMC)
    IEC60950, ITE CB Scheme Electrical Safety
    Australia C-Tick Mark, New Zealand EMC, China
    Taiwan (5355 only)

Related Categories