HID® Proximity MaxiProx® 5375
Category HID Proximity
Brand HID

HID's MaxiProx® Reader is ideal for installations incorporating parking control and long read range applications. The MaxiProx reader packages all the electronics in one rugged, attractive and easy-to-install housing

  • Long read range distance (up to 6' with ProxPass)
  • Autotune allows read range to be maintained within four inches of metal
  • Wiegand, Clock-and-Data, RS-232 and RS-422 output modes are configurable
  • "Parking hold" feature ensures accurate detection of vehicles in parking lanes
  • Power requirements: 12 or 24 VDC (configurable)
  • Current requirements: 200mA avg / 700 mA peak at 12VDC; 260mA avg / 1.2A peak at 24 VDC
  • Dimensions: 12.0" x 12.0" x 1.0" (30.5 x 30.5 x 2.54 cm)
Key Features: 
  • Compatible with all HID cards and tags with formats up to 85 bits
  • Multicolor LED with internal or host control of the LED and beeper
  • Two MaxiProx units can operate one meter apart for "HI-LO" (truck and car) installations
  • Reader supervision signal for CASI-RUSCO panels
  • Typical Maximum Read Range*
    ProxCard II Card - up to 24" (60.9 cm)
    ISOProx II Card - up to 20" (50.8 cm)
    DuoProx II Card - up to 20" (50.8 cm)
    Smart ISOProx II - up to 20" (50.8 cm)
    Smart DuoProx II Card - up to 20" (50.8 cm)
    HID Proximity MIFARE Card - up to 20" (50.8 cm)
    ProxCard®Plus Card - up to 13" (33 cm)
    ProxKey II Keyfob - up to 17" (43.2 cm)
    Microprox Tag - up to 15" (38 cm)
    ProxPass Active Vehicle Tag - up to 6' (1.8 m)

    *Depending on local installation conditions.

    11.8" x 11.8" x 1.0" (30.0 x 30.0 x 2.54 cm)

    Cable distance
    Wiegand interface: 500 feet (152 m)
    Clock-and-data interface: 50 feet (15 m)
    RS-232: 50-200 feet (15-61 m)
    Recommended cable is ALPHA 1295 (22 AWG) 5 conductor minimum stranded with overall shield or equivalent. Additional conductors may be required for LED or beeper control.
    RS-422 and RS-485: 4000 feet (1219 m)
    Recommended cable is ALPHA 1297.

    Power supply
    Configurable 12 or 24 VDC
    Linear power supplies are recommended.

    Current requirements
    DC Current at 12V: Avg. 200mA, Peak 700mA
    DC Current at 24V: Avg. 260mA, Peak 1.2A

    Operating temperature
    -22º to 150º F (-30º to 65º C)

    Operating humidity
    0-95% relative humidity non-condensing

    51 oz. (1.4 kgm)

    Canada/UL 294 Listed: Access Control System Units
    FCC Certification, United States
    Canada Certification
    CE Mark, Fifteen EU Countries under the R&TTE
    Directive (EN60950 - ITE Electrical Safety, EN 300 330 - SRD, and ETS 300 683 - EMC)
    IEC60950, ITE CB Scheme Electrical Safety
    Australia C-Tick Mark
    New Zealand EMC


Related Categories